Description

Audi A4 A5 B8.5 Front & Rear Parking Sensor Retrofit Kit with Display

Front & Rear Parking Sensors with Display – Audi A4/A5 B8.5

Upgrade your Audi with this front and rear parking sensor retrofit kit with display, designed for compatible Audi A4 and Audi A5 B8.5 models from approximately 2013–2015.

This retrofit system is designed to improve parking awareness by providing front and rear parking sensor coverage and visual distance information through the included display. It is an ideal upgrade for vehicles that were not originally equipped with factory parking sensors.

The system can help detect nearby obstacles when maneuvering into parking spaces, garages, driveways, and other tight areas.

Product Highlights

• Front + rear parking sensor retrofit kit
• Designed for compatible Audi A4/A5 B8.5
• Compatibility: approximately 2013–2015
• Includes parking sensor display
• Front and rear obstacle detection
• Retrofit solution for vehicles without factory parking sensors
• Helps improve parking visibility and driver awareness
• Suitable for retrofit and replacement projects
• Exact components may vary depending on the kit configuration
• Professional installation recommended
• Worldwide shipping available

Vehicle Compatibility

Potential compatibility includes:

• Audi A4 B8.5
• Audi A5 B8.5
• 2013
• 2014
• 2015

Exact compatibility can depend on the vehicle’s:

• Model year
• Body style
• Existing parking system
• Bumper design
• Wiring configuration
• Control module
• Display/interface configuration

Please compare your vehicle and existing equipment with the kit before ordering.

Front & Rear Parking Assistance

The retrofit kit provides parking sensor coverage at both ends of the vehicle.

Front Parking Sensors

Front sensors help detect obstacles when moving forward into tight spaces, parking areas, garages, and other confined locations.

Rear Parking Sensors

Rear sensors provide additional obstacle detection when reversing, helping the driver judge the available space behind the vehicle.

Display

The included display provides visual parking-assistance information, allowing the driver to see detected obstacles and approximate distance information.

The exact display appearance and installation location can vary according to the kit and vehicle configuration.

Retrofit Installation

Installation requires integrating the parking sensors, wiring, control system, and display into the vehicle.

Depending on the vehicle and kit, installation may involve:

• Front bumper sensor installation
• Rear bumper sensor installation
• Sensor wiring
• Control module installation
• Display installation
• Power connections
• Signal connections
• System testing
• Vehicle coding or adaptation where required

Professional installation is recommended.

The bumpers may require accurate drilling or use of existing sensor provisions. Sensor positioning is important because incorrect placement can affect detection performance.

After installation, the complete system should be tested to confirm that all front and rear sensors and the display operate correctly.

Important Compatibility Information

This is a retrofit parking sensor system, so it should not be assumed to be plug-and-play on every A4 or A5.

Before purchasing, verify:

• Audi model
• Model year
• B8.5 facelift configuration
• Front bumper design
• Rear bumper design
• Existing parking sensor equipment
• Wiring configuration
• Control module compatibility
• Display compatibility
• Coding/adaptation requirements

If your Audi already has factory parking sensors, compare the existing system with the retrofit kit before ordering.

Condition

Please refer to the product listing and photographs for the exact condition and included components.

If supplied as a used or pre-owned kit, normal signs of previous use such as minor marks or surface wear may be present. Please inspect the photographs carefully before purchase.